Cibes C1 Pure Commercial Lift - Martin Place Sydney

Upgrade Your Building Lift with a Cibes C1 Pure – Maximum Space Efficiency and Sleek Design!

Recently, we installed a brand-new Cibes C1 Pure lift in one of the historic buildings located in Martin Place Sydney.

This two-stop lift offers a travelling height of 4110mmm and is sure to provide smooth and reliable transport for all its users!

The Cibes C1 Pure was the ideal choice for management, exemplifying both maximum space efficiency and a sleek Scandinavian design.
Its timeless appeal is perfect for public, commercial and residential buildings alike – making it clear why this lift has become so successful.

As an added bonus, its space-saving solution allows you to make use of every inch of your building’s floor plan with ease!

CIBES C1 PURE (300/375/450/525/630 KG)

Ready-made lift concept

This lift arrives in pre-assembled parts, making installation a breeze!

Reduced building costs

Installing the lift is far easier as it comes with a pre-fabricated shaft, thus limiting any need for adaptation to your building and lowering installation expenses.

Small footprint

Unlike most lifts, C1 Pure has no machinery above or beneath the lift, everything fits inside the shaft. This makes C1 Pure very space-efficient and easy to install.

Fast & easy installation

The ready-made lift concept can be installed in just a few days and requires minimal building preparation. All electrics are plugged & play and the C1 Pure is available in versions prepared for 3×400, 3×230 and 1×230 VAC power supplies.

Check out the Actual Drawing and Specifications of C1 Pure

Rated load: 300/375/450/525/630 kg
Power supply: 3 × 400 VAC/3 × 230 VAC, 50/60 Hz, 16 A, 5 × 2,5 mm² or 1 × 230 VAC 50/60 Hz, 32 A 5 × 2,5 mm²
Speed: max 0.15 m/s
Min headroom top floor: 2500 mm
Lift pit: 100 mm (120 mm if the floor is fitted with wood laminate or tiles)
Max travel: 15 m
Max number of stops: 6

Note: The cutout sizes may vary depending on lift configuration. For exact measurements, please ask Cibes for project-specific drawings.